(* Copyright (c) 2011-2012, Adam Chlipala
 * 
 * This work is licensed under a
 * Creative Commons Attribution-Noncommercial-No Derivative Works 3.0
 * Unported License.
 * The license text is available at:
 *   http://creativecommons.org/licenses/by-nc-nd/3.0/
 *)

(* begin hide *)

Require Import List.

Require Import CpdtTactics.

Set Implicit Arguments.

(* end hide *)

(** %\part{Proof Engineering}

   \chapter{Proof Search by Logic Programming}% *)

(** The Curry-Howard correspondence tells us that proving is %``%#"#just#"#%''% programming, but the pragmatics of the two activities are very different.  Generally we care about properties of a program besides its type, but the same is not true about proofs.  Any proof of a theorem will do just as well.  As a result, automated proof search is conceptually simpler than automated programming.

   The paradigm of %\index{logic programming}%logic programming, as embodied in languages like %\index{Prolog}%Prolog, is a good match for proof search in higher-order logic.  This chapter introduces the details, attempting to avoid any dependence on past logic programming experience. *)


(** * Introducing Logic Programming *)

(** Recall the definition of addition from the standard library. *)

Print plus.
(** %\vspace{-.15in}%[[
plus = 
fix plus (n m : nat) : nat := match n with
                              | 0 => m
                              | S p => S (plus p m)
                              end

]]

This is a recursive definition, in the style of functional programming.  We might also follow the style of logic programming, which corresponds to the inductive relations we have defined in previous chapters. *)

Inductive plusR : nat -> nat -> nat -> Prop :=
| PlusO : forall m, plusR O m m
| PlusS : forall n m r, plusR n m r
  -> plusR (S n) m (S r).

(** Intuitively, a fact [plusR n m r] only holds when [plus n m = r].  It is not hard to prove this correspondence formally. *)

(* begin thide *)
Hint Constructors plusR.
(* end thide *)

Theorem plus_plusR : forall n m,
  plusR n m (n + m).
(* begin thide *)
  induction n; crush.
Qed.
(* end thide *)

Theorem plusR_plus : forall n m r,
  plusR n m r
  -> r = n + m.
(* begin thide *)
  induction 1; crush.
Qed.
(* end thide *)

(** With the functional definition of [plus], simple equalities about arithmetic follow by computation. *)

Example four_plus_three : 4 + 3 = 7.
(* begin thide *)
  reflexivity.
Qed.
(* end thide *)

Print four_plus_three.
(** %\vspace{-.15in}%[[
four_plus_three = eq_refl
]]

With the relational definition, the same equalities take more steps to prove, but the process is completely mechanical.  For example, consider this simple-minded manual proof search strategy.  The steps with error messages shown afterward will be omitted from the final script.
*)

Example four_plus_three' : plusR 4 3 7.
(* begin thide *)
(** %\vspace{-.2in}%[[
  apply PlusO.
]]
%\vspace{-.2in}%
<<
Error: Impossible to unify "plusR 0 ?24 ?24" with "plusR 4 3 7".
>> *)
  apply PlusS.
(** %\vspace{-.2in}%[[
  apply PlusO.
]]
%\vspace{-.2in}%
<<
Error: Impossible to unify "plusR 0 ?25 ?25" with "plusR 3 3 6".
>> *)
  apply PlusS.
(** %\vspace{-.2in}%[[
  apply PlusO.
]]
%\vspace{-.2in}%
<<
Error: Impossible to unify "plusR 0 ?26 ?26" with "plusR 2 3 5".
>> *)
  apply PlusS.
(** %\vspace{-.2in}%[[
  apply PlusO.
]]
%\vspace{-.2in}%
<<
Error: Impossible to unify "plusR 0 ?27 ?27" with "plusR 1 3 4".
>> *)
  apply PlusS.
  apply PlusO.

(** At this point the proof is completed.  It is no doubt clear that a simple procedure could find all proofs of this kind for us.  We are just exploring all possible proof trees, built from the two candidate steps [apply PlusO] and [apply PlusS].  The built-in tactic %\index{tactics!auto}%[auto] does exactly that, since above we used [Hint Constructors] to register the two candidate proof steps as hints. *)

Restart.
  auto.
Qed.
(* end thide *)

Print four_plus_three'.
(** %\vspace{-.15in}%[[
four_plus_three' = PlusS (PlusS (PlusS (PlusS (PlusO 3))))
]]
*)

(** Let us try the same approach on a slightly more complex goal. *)

Example five_plus_three : plusR 5 3 8.
(* begin thide *)
  auto.

(** This time, [auto] is not enough to make any progress.  Since even a single candidate step may lead to an infinite space of possible proof trees, [auto] is parameterized on the maximum depth of trees to consider.  The default depth is 5, and it turns out that we need depth 6 to prove the goal. *)

  auto 6.

(** Sometimes it is useful to see a description of the proof tree that [auto] finds, with the %\index{tactics!info}%[info] tactical. *)

Restart.
  info auto 6.
(** %\vspace{-.15in}%[[
 == apply PlusS; apply PlusS; apply PlusS; apply PlusS; 
    apply PlusS; apply PlusO.
]]
*)
Qed.
(* end thide *)

(** The two key components of logic programming are %\index{backtracking}\emph{%#<i>#backtracking#</i>#%}% and %\index{unification}\emph{%#<i>#unification#</i>#%}%.  To see these techniques in action, consider this further silly example.  Here our candidate proof steps will be reflexivity and quantifier instantiation. *)

Example seven_minus_three : exists x, x + 3 = 7.
(* begin thide *)
(** For explanatory purposes, let us simulate a user with minimal understanding of arithmetic.  We start by choosing an instantiation for the quantifier.  Recall that [ex_intro] is the constructor for existentially quantified formulas. *)

  apply ex_intro with 0.
(** %\vspace{-.2in}%[[
  reflexivity.
]]
%\vspace{-.2in}%
<<
  Error: Impossible to unify "7" with "0 + 3".
>>

This seems to be a dead end.  Let us %\emph{%#<i>#backtrack#</i>#%}% to the point where we ran [apply] and make a better alternate choice.
*)

Restart.
  apply ex_intro with 4.
  reflexivity.
Qed.
(* end thide *)

(** The above was a fairly tame example of backtracking.  In general, any node in an under-construction proof tree may be the destination of backtracking an arbitrarily large number of times, as different candidate proof steps are found not to lead to full proof trees, within the depth bound passed to [auto].

   Next we demonstrate unification, which will be easier when we switch to the relational formulation of addition. *)

Example seven_minus_three' : exists x, plusR x 3 7.
(* begin thide *)
(** We could attempt to guess the quantifier instantiation manually as before, but here there is no need.  Instead of [apply], we use %\index{tactics!eapply}%[eapply] instead, which proceeds with placeholder %\index{unification variable}\emph{%#<i>#unification variables#</i>#%}% standing in for those parameters we wish to postpone guessing. *)

  eapply ex_intro.
(** [[
1 subgoal
  
  ============================
   plusR ?70 3 7
]]

Now we can finish the proof with the right applications of [plusR]'s constructors.  Note that new unification variables are being generated to stand for new unknowns. *)

  apply PlusS.
(** [[
  ============================
   plusR ?71 3 6
]]
*)
  apply PlusS. apply PlusS. apply PlusS.
(** [[
  ============================
   plusR ?74 3 3
]]
*)
  apply PlusO.

(** The [auto] tactic will not perform these sorts of steps that introduce unification variables, but the %\index{tactics!eauto}%[eauto] tactic will.  It is helpful to work with two separate tactics, because proof search in the [eauto] style can uncover many more potential proof trees and hence take much longer to run. *)

Restart.
  info eauto 6.
(** %\vspace{-.15in}%[[
 == eapply ex_intro; apply PlusS; apply PlusS; 
    apply PlusS; apply PlusS; apply PlusO.
]]
*)
Qed.
(* end thide *)

(** This proof gives us our first example where logic programming simplifies proof search compared to functional programming.  In general, functional programs are only meant to be run in a single direction; a function has disjoint sets of inputs and outputs.  In the last example, we effectively ran a logic program backwards, deducing an input that gives rise to a certain output.  The same works for deducing an unknown value of the other input. *)

Example seven_minus_four' : exists x, plusR 4 x 7.
(* begin thide *)
  eauto 6.
Qed.
(* end thide *)

(** By proving the right auxiliary facts, we can reason about specific functional programs in the same way as we did above for a logic program.  Let us prove that the constructors of [plusR] have natural interpretations as lemmas about [plus].  We can find the first such lemma already proved in the standard library, using the %\index{Vernacular commands!SearchRewrite}%[SearchRewrite] command to find a library function proving an equality whose lefthand or righthand side matches a pattern with wildcards. *)

(* begin thide *)
SearchRewrite (O + _).
(** %\vspace{-.15in}%[[
plus_O_n: forall n : nat, 0 + n = n
]]

The command %\index{Vernacular commands!Hint Immediate}%[Hint Immediate] asks [auto] and [eauto] to consider this lemma as a candidate step for any leaf of a proof tree. *)

Hint Immediate plus_O_n.

(** The counterpart to [PlusS] we will prove ourselves. *)

Lemma plusS : forall n m r,
  n + m = r
  -> S n + m = S r.
  crush.
Qed.

(** The command %\index{Vernacular commands!Hint Resolve}%[Hint Resolve] adds a new candidate proof step, to be attempted at any level of a proof tree, not just at leaves. *)

Hint Resolve plusS.
(* end thide *)

(** Now that we have registered the proper hints, we can replicate our previous examples with the normal, functional addition [plus]. *)

Example seven_minus_three'' : exists x, x + 3 = 7.
(* begin thide *)
  eauto 6.
Qed.
(* end thide *)

Example seven_minus_four : exists x, 4 + x = 7.
(* begin thide *)
  eauto 6.
Qed.
(* end thide *)

(** This new hint database is far from a complete decision procedure, as we see in a further example that [eauto] does not finish. *)

Example seven_minus_four_zero : exists x, 4 + x + 0 = 7.
(* begin thide *)
  eauto 6.
Abort.
(* end thide *)

(** A further lemma will be helpful. *)

(* begin thide *)
Lemma plusO : forall n m,
  n = m
  -> n + 0 = m.
  crush.
Qed.

Hint Resolve plusO.
(* end thide *)

(** Note that, if we consider the inputs to [plus] as the inputs of a corresponding logic program, the new rule [plusO] introduces an ambiguity.  For instance, a sum [0 + 0] would match both of [plus_O_n] and [plusO], depending on which operand we focus on.  This ambiguity may increase the number of potential search trees, slowing proof search, but semantically it presents no problems, and in fact it leads to an automated proof of the present example. *)

Example seven_minus_four_zero : exists x, 4 + x + 0 = 7.
(* begin thide *)
  eauto 7.
Qed.
(* end thide *)

(** Just how much damage can be done by adding hints that grow the space of possible proof trees?  A classic gotcha comes from unrestricted use of transitivity, as embodied in this library theorem about equality: *)

Check eq_trans.
(** %\vspace{-.15in}%[[
eq_trans
     : forall (A : Type) (x y z : A), x = y -> y = z -> x = z
]]
*)

(** Hints are scoped over sections, so let us enter a section to contain the effects of an unfortunate hint choice. *)

Section slow.
  Hint Resolve eq_trans.

  (** The following fact is false, but that does not stop [eauto] from taking a very long time to search for proofs of it.  We use the handy %\index{Vernacular commands!Time}%[Time] command to measure how long a proof step takes to run.  None of the following steps make any progress. *)

  Example three_minus_four_zero : exists x, 1 + x = 0.
    Time eauto 1.
(** %\vspace{-.15in}%
<<
Finished transaction in 0. secs (0.u,0.s)
>>
*)

    Time eauto 2.
(** %\vspace{-.15in}%
<<
Finished transaction in 0. secs (0.u,0.s)
>>
*)

    Time eauto 3.
(** %\vspace{-.15in}%
<<
Finished transaction in 0. secs (0.008u,0.s)
>>
*)

    Time eauto 4.
(** %\vspace{-.15in}%
<<
Finished transaction in 0. secs (0.068005u,0.004s)
>>
*)

    Time eauto 5.
(** %\vspace{-.15in}%
<<
Finished transaction in 2. secs (1.92012u,0.044003s)
>>
*)

(** We see worrying exponential growth in running time, and the %\index{tactics!debug}%[debug] tactical helps us see where [eauto] is wasting its time, outputting a trace of every proof step that is attempted.  The rule [eq_trans] applies at every node of a proof tree, and [eauto] tries all such positions. *)

    debug eauto 3.
(** [[
1 depth=3 
1.1 depth=2 eapply ex_intro
1.1.1 depth=1 apply plusO
1.1.1.1 depth=0 eapply eq_trans
1.1.2 depth=1 eapply eq_trans
1.1.2.1 depth=1 apply plus_n_O
1.1.2.1.1 depth=0 apply plusO
1.1.2.1.2 depth=0 eapply eq_trans
1.1.2.2 depth=1 apply @eq_refl
1.1.2.2.1 depth=0 apply plusO
1.1.2.2.2 depth=0 eapply eq_trans
1.1.2.3 depth=1 apply eq_add_S ; trivial
1.1.2.3.1 depth=0 apply plusO
1.1.2.3.2 depth=0 eapply eq_trans
1.1.2.4 depth=1 apply eq_sym ; trivial
1.1.2.4.1 depth=0 eapply eq_trans
1.1.2.5 depth=0 apply plusO
1.1.2.6 depth=0 apply plusS
1.1.2.7 depth=0 apply f_equal (A:=nat)
1.1.2.8 depth=0 apply f_equal2 (A1:=nat) (A2:=nat)
1.1.2.9 depth=0 eapply eq_trans
]]
*)
  Abort.
End slow.

(** Sometimes, though, transitivity is just what is needed to get a proof to go through automatically with [eauto].  For those cases, we can use named %\index{hint databases}\emph{%#<i>#hint databases#</i>#%}% to segragate hints into different groups that may be called on as needed.  Here we put [eq_trans] into the database [slow]. *)

(* begin thide *)
Hint Resolve eq_trans : slow.
(* end thide *)

Example three_minus_four_zero : exists x, 1 + x = 0.
(* begin thide *)
  Time eauto.
(** %\vspace{-.15in}%
<<
Finished transaction in 0. secs (0.004u,0.s)
>>

This [eauto] fails to prove the goal, but it least it takes substantially less than the 2 seconds required above! *)

Abort.
(* end thide *)

(** One simple example from before runs in the same amount of time, avoiding pollution by transivity. *)

Example seven_minus_three_again : exists x, x + 3 = 7.
(* begin thide *)
  Time eauto 6.
(** %\vspace{-.15in}%
<<
Finished transaction in 0. secs (0.004001u,0.s)
>>
%\vspace{-.2in}% *)

Qed.
(* end thide *)

(** When we %\emph{%#<i>#do#</i>#%}% need transitivity, we ask for it explicitly. *)

Example needs_trans : forall x y, 1 + x = y
  -> y = 2
  -> exists z, z + x = 3.
(* begin thide *)
  info eauto with slow.
(** %\vspace{-.2in}%[[
 == intro x; intro y; intro H; intro H0; simple eapply ex_intro; 
    apply plusS; simple eapply eq_trans.
    exact H.
    
    exact H0.
]]
*)
Qed.
(* end thide *)

(** The [info] trace shows that [eq_trans] was used in just the position where it is needed to complete the proof.  We also see that [auto] and [eauto] always perform [intro] steps without counting them toward the bound on proof tree depth. *)


(** * Searching for Underconstrained Values *)

Print length.

Example length_1_2 : length (1 :: 2 :: nil) = 2.
  auto.
Qed.

Print length_1_2.

(* begin thide *)
Theorem length_O : forall A, length (nil (A := A)) = O.
  crush.
Qed.

Theorem length_S : forall A (h : A) t n,
  length t = n
  -> length (h :: t) = S n.
  crush.
Qed.

Hint Resolve length_O length_S.
(* end thide *)

Example length_is_2 : exists ls : list nat, length ls = 2.
(* begin thide *)
  eauto.

  Show Proof.
Abort.
(* end thide *)

Print Forall.

Example length_is_2 : exists ls : list nat, length ls = 2
  /\ Forall (fun n => n >= 1) ls.
(* begin thide *)
  eauto 9.
Qed.
(* end thide *)

Definition sum := fold_right plus O.

(* begin thide *)
Lemma plusO' : forall n m,
  n = m
  -> 0 + n = m.
  crush.
Qed.

Hint Resolve plusO'.

Hint Extern 1 (sum _ = _) => simpl.
(* end thide *)

Example length_and_sum : exists ls : list nat, length ls = 2
  /\ sum ls = O.
(* begin thide *)
  eauto 7.
Qed.
(* end thide *)

Print length_and_sum.

Example length_and_sum' : exists ls : list nat, length ls = 5
  /\ sum ls = 42.
(* begin thide *)
  eauto 15.
Qed.
(* end thide *)

Print length_and_sum'.

Example length_and_sum'' : exists ls : list nat, length ls = 2
  /\ sum ls = 3
  /\ Forall (fun n => n <> 0) ls.
(* begin thide *)
  eauto 11.
Qed.
(* end thide *)

Print length_and_sum''.


(** * Synthesizing Programs *)

Inductive exp : Set :=
| Const : nat -> exp
| Var : exp
| Plus : exp -> exp -> exp.

Inductive eval (var : nat) : exp -> nat -> Prop :=
| EvalConst : forall n, eval var (Const n) n
| EvalVar : eval var Var var
| EvalPlus : forall e1 e2 n1 n2, eval var e1 n1
  -> eval var e2 n2
  -> eval var (Plus e1 e2) (n1 + n2).

(* begin thide *)
Hint Constructors eval.
(* end thide *)

Example eval1 : forall var, eval var (Plus Var (Plus (Const 8) Var)) (var + (8 + var)).
(* begin thide *)
  auto.
Qed.
(* end thide *)

Example eval1' : forall var, eval var (Plus Var (Plus (Const 8) Var)) (2 * var + 8).
(* begin thide *)
  eauto.
Abort.
(* end thide *)

(* begin thide *)
Theorem EvalPlus' : forall var e1 e2 n1 n2 n, eval var e1 n1
  -> eval var e2 n2
  -> n1 + n2 = n
  -> eval var (Plus e1 e2) n.
  crush.
Qed.

Hint Resolve EvalPlus'.

Hint Extern 1 (_ = _) => abstract omega.
(* end thide *)

Example eval1' : forall var, eval var (Plus Var (Plus (Const 8) Var)) (2 * var + 8).
(* begin thide *)
  eauto.
Qed.
(* end thide *)

Print eval1'.

Example synthesize1 : exists e, forall var, eval var e (var + 7).
(* begin thide *)
  eauto.
Qed.
(* end thide *)

Print synthesize1.

Example synthesize2 : exists e, forall var, eval var e (2 * var + 8).
(* begin thide *)
  eauto.
Qed.
(* end thide *)

Print synthesize2.

Example synthesize3 : exists e, forall var, eval var e (3 * var + 42).
(* begin thide *)
  eauto.
Qed.
(* end thide *)

Print synthesize3.

(* begin thide *)
Theorem EvalConst' : forall var n m, n = m
  -> eval var (Const n) m.
  crush.
Qed.

Hint Resolve EvalConst'.

Theorem zero_times : forall n m r,
  r = m
  -> r = 0 * n + m.
  crush.
Qed.

Hint Resolve zero_times.

Theorem EvalVar' : forall var n,
  var = n
  -> eval var Var n.
  crush.
Qed.

Hint Resolve EvalVar'.

Theorem plus_0 : forall n r,
  r = n
  -> r = n + 0.
  crush.
Qed.

Theorem times_1 : forall n, n = 1 * n.
  crush.
Qed.

Hint Resolve plus_0 times_1.

Require Import Arith Ring.

Theorem combine : forall x k1 k2 n1 n2,
  (k1 * x + n1) + (k2 * x + n2) = (k1 + k2) * x + (n1 + n2).
  intros; ring.
Qed.

Hint Resolve combine.

Theorem linear : forall e, exists k, exists n,
  forall var, eval var e (k * var + n).
  induction e; crush; eauto.
Qed.

Print linear.
(* end thide *)


(** * More on [auto] Hints *)

(** Another class of built-in tactics includes [auto], [eauto], and [autorewrite].  These are based on %\textit{%#<i>#hint databases#</i>#%}%, which we have seen extended in many examples so far.  These tactics are important, because, in Ltac programming, we cannot create %``%#"#global variables#"#%''% whose values can be extended seamlessly by different modules in different source files.  We have seen the advantages of hints so far, where [crush] can be defined once and for all, while still automatically applying the hints we add throughout developments.

The basic hints for [auto] and [eauto] are [Hint Immediate lemma], asking to try solving a goal immediately by applying a lemma and discharging any hypotheses with a single proof step each; [Resolve lemma], which does the same but may add new premises that are themselves to be subjects of nested proof search; [Constructors type], which acts like [Resolve] applied to every constructor of an inductive type; and [Unfold ident], which tries unfolding [ident] when it appears at the head of a proof goal.  Each of these [Hint] commands may be used with a suffix, as in [Hint Resolve lemma : my_db].  This adds the hint only to the specified database, so that it would only be used by, for instance, [auto with my_db].  An additional argument to [auto] specifies the maximum depth of proof trees to search in depth-first order, as in [auto 8] or [auto 8 with my_db].  The default depth is 5.

All of these [Hint] commands can be issued alternatively with a more primitive hint kind, [Extern].  A few examples should do best to explain how [Hint Extern] works. *)

Theorem bool_neq : true <> false.
(* begin thide *)
  auto.

  (** [crush] would have discharged this goal, but the default hint database for [auto] contains no hint that applies. *)

Abort.

(** It is hard to come up with a [bool]-specific hint that is not just a restatement of the theorem we mean to prove.  Luckily, a simpler form suffices. *)

Hint Extern 1 (_ <> _) => congruence.

Theorem bool_neq : true <> false.
  auto.
Qed.
(* end thide *)

(** Our hint says: %``%#"#whenever the conclusion matches the pattern [_ <> _], try applying [congruence].#"#%''%  The [1] is a cost for this rule.  During proof search, whenever multiple rules apply, rules are tried in increasing cost order, so it pays to assign high costs to relatively expensive [Extern] hints.

[Extern] hints may be implemented with the full Ltac language.  This example shows a case where a hint uses a [match]. *)

Section forall_and.
  Variable A : Set.
  Variables P Q : A -> Prop.

  Hypothesis both : forall x, P x /\ Q x.

  Theorem forall_and : forall z, P z.
(* begin thide *)
    crush.

    (** [crush] makes no progress beyond what [intros] would have accomplished.  [auto] will not apply the hypothesis [both] to prove the goal, because the conclusion of [both] does not unify with the conclusion of the goal.  However, we can teach [auto] to handle this kind of goal. *)

    Hint Extern 1 (P ?X) =>
      match goal with
        | [ H : forall x, P x /\ _ |- _ ] => apply (proj1 (H X))
      end.

    auto.
  Qed.
(* end thide *)

  (** We see that an [Extern] pattern may bind unification variables that we use in the associated tactic.  [proj1] is a function from the standard library for extracting a proof of [R] from a proof of [R /\ S]. *)

End forall_and.

(** After our success on this example, we might get more ambitious and seek to generalize the hint to all possible predicates [P].

   [[
  Hint Extern 1 (?P ?X) =>
    match goal with
      | [ H : forall x, P x /\ _ |- _ ] => apply (proj1 (H X))
    end.

User error: Bound head variable
 
   ]]

   Coq's [auto] hint databases work as tables mapping %\textit{%#<i>#head symbols#</i>#%}% to lists of tactics to try.  Because of this, the constant head of an [Extern] pattern must be determinable statically.  In our first [Extern] hint, the head symbol was [not], since [x <> y] desugars to [not (eq x y)]; and, in the second example, the head symbol was [P].

   This restriction on [Extern] hints is the main limitation of the [auto] mechanism, preventing us from using it for general context simplifications that are not keyed off of the form of the conclusion.  This is perhaps just as well, since we can often code more efficient tactics with specialized Ltac programs, and we will see how in the next chapter. *)


(** * Rewrite Hints *)

   (** We have used [Hint Rewrite] in many examples so far.  [crush] uses these hints by calling [autorewrite].  Our rewrite hints have taken the form [Hint Rewrite lemma : cpdt], adding them to the [cpdt] rewrite database.  This is because, in contrast to [auto], [autorewrite] has no default database.  Thus, we set the convention that [crush] uses the [cpdt] database.

   This example shows a direct use of [autorewrite]. *)

Section autorewrite.
  Variable A : Set.
  Variable f : A -> A.

  Hypothesis f_f : forall x, f (f x) = f x.

  Hint Rewrite f_f : my_db.

  Lemma f_f_f : forall x, f (f (f x)) = f x.
    intros; autorewrite with my_db; reflexivity.
  Qed.

  (** There are a few ways in which [autorewrite] can lead to trouble when insufficient care is taken in choosing hints.  First, the set of hints may define a nonterminating rewrite system, in which case invocations to [autorewrite] may not terminate.  Second, we may add hints that %``%#"#lead [autorewrite] down the wrong path.#"#%''%  For instance: *)

  Section garden_path.
    Variable g : A -> A.
    Hypothesis f_g : forall x, f x = g x.
    Hint Rewrite f_g : my_db.

    Lemma f_f_f' : forall x, f (f (f x)) = f x.
      intros; autorewrite with my_db.
      (** [[
============================
 g (g (g x)) = g x
          ]]
          *)

    Abort.

    (** Our new hint was used to rewrite the goal into a form where the old hint could no longer be applied.  This %``%#"#non-monotonicity#"#%''% of rewrite hints contrasts with the situation for [auto], where new hints may slow down proof search but can never %``%#"#break#"#%''% old proofs.  The key difference is that [auto] either solves a goal or makes no changes to it, while [autorewrite] may change goals without solving them.  The situation for [eauto] is slightly more complicated, as changes to hint databases may change the proof found for a particular goal, and that proof may influence the settings of unification variables that appear elsewhere in the proof state. *)

  Reset garden_path.

  (** [autorewrite] also works with quantified equalities that include additional premises, but we must be careful to avoid similar incorrect rewritings. *)

  Section garden_path.
    Variable P : A -> Prop.
    Variable g : A -> A.
    Hypothesis f_g : forall x, P x -> f x = g x.
    Hint Rewrite f_g : my_db.

    Lemma f_f_f' : forall x, f (f (f x)) = f x.
      intros; autorewrite with my_db.
      (** [[

  ============================
   g (g (g x)) = g x

subgoal 2 is:
 P x
subgoal 3 is:
 P (f x)
subgoal 4 is:
 P (f x)
          ]]
          *)

    Abort.

    (** The inappropriate rule fired the same three times as before, even though we know we will not be able to prove the premises. *)

  Reset garden_path.

  (** Our final, successful, attempt uses an extra argument to [Hint Rewrite] that specifies a tactic to apply to generated premises.  Such a hint is only used when the tactic succeeds for all premises, possibly leaving further subgoals for some premises. *)

  Section garden_path.
    Variable P : A -> Prop.
    Variable g : A -> A.
    Hypothesis f_g : forall x, P x -> f x = g x.
(* begin thide *)
    Hint Rewrite f_g using assumption : my_db.
(* end thide *)

    Lemma f_f_f' : forall x, f (f (f x)) = f x.
(* begin thide *)
      intros; autorewrite with my_db; reflexivity.
    Qed.
(* end thide *)

    (** [autorewrite] will still use [f_g] when the generated premise is among our assumptions. *)

    Lemma f_f_f_g : forall x, P x -> f (f x) = g x.
(* begin thide *)
      intros; autorewrite with my_db; reflexivity.
(* end thide *)
    Qed.
  End garden_path.

  (** remove printing * *)

  (** It can also be useful to use the [autorewrite with db in *] form, which does rewriting in hypotheses, as well as in the conclusion. *)

  (** printing * $*$ *)

  Lemma in_star : forall x y, f (f (f (f x))) = f (f y)
    -> f x = f (f (f y)).
(* begin thide *)
    intros; autorewrite with my_db in *; assumption.
(* end thide *)
  Qed.

End autorewrite.