view src/Coinductive.v @ 348:f3154417cd41

Typo fix in template comment
line wrap: on
line source
(* Copyright (c) 2008-2011, Adam Chlipala
*
* Creative Commons Attribution-Noncommercial-No Derivative Works 3.0
* The license text is available at:
*)

(* begin hide *)
Require Import List.

Require Import CpdtTactics.

Set Implicit Arguments.
(* end hide *)

(** %\chapter{Infinite Data and Proofs}% *)

(** In lazy functional programming languages like %\index{Haskell}%Haskell, infinite data structures are everywhere.  Infinite lists and more exotic datatypes provide convenient abstractions for communication between parts of a program.  Achieving similar convenience without infinite lazy structures would, in many cases, require acrobatic inversions of control flow.

%\index{laziness}%Laziness is easy to implement in Haskell, where all the definitions in a program may be thought of as mutually recursive.  In such an unconstrained setting, it is easy to implement an infinite loop when you really meant to build an infinite list, where any finite prefix of the list should be forceable in finite time.  Haskell programmers learn how to avoid such slip-ups.  In Coq, such a laissez-faire policy is not good enough.

We spent some time in the last chapter discussing the %\index{Curry-Howard correspondence}%Curry-Howard isomorphism, where proofs are identified with functional programs.  In such a setting, infinite loops, intended or otherwise, are disastrous.  If Coq allowed the full breadth of definitions that Haskell did, we could code up an infinite loop and use it to prove any proposition vacuously.  That is, the addition of general recursion would make CIC %\textit{%#<i>#inconsistent#</i>#%}%.  For an arbitrary proposition [P], we could write:
[[
]]

This would leave us with [bad tt] as a proof of [P].

There are also algorithmic considerations that make universal termination very desirable.  We have seen how tactics like [reflexivity] compare terms up to equivalence under computational rules.  Calls to recursive, pattern-matching functions are simplified automatically, with no need for explicit proof steps.  It would be very hard to hold onto that kind of benefit if it became possible to write non-terminating programs; we would be running smack into the halting problem.

One solution is to use types to contain the possibility of non-termination.  For instance, we can create a %%#"#non-termination monad,#"#%''% inside which we must write all of our general-recursive programs.  This is a heavyweight solution, and so we would like to avoid it whenever possible.

Luckily, Coq has special support for a class of lazy data structures that happens to contain most examples found in Haskell.  That mechanism, %\index{co-inductive types}\textit{%#<i>#co-inductive types#</i>#%}%, is the subject of this chapter. *)

(** * Computing with Infinite Data *)

(** Let us begin with the most basic type of infinite data, %\textit{%#<i>#streams#</i>#%}%, or lazy lists.%\index{Vernacular commands!CoInductive}% *)

Section stream.
Variable A : Set.

CoInductive stream : Set :=
| Cons : A -> stream -> stream.
End stream.

(** The definition is surprisingly simple.  Starting from the definition of [list], we just need to change the keyword [Inductive] to [CoInductive].  We could have left a [Nil] constructor in our definition, but we will leave it out to force all of our streams to be infinite.

How do we write down a stream constant?  Obviously simple application of constructors is not good enough, since we could only denote finite objects that way.  Rather, whereas recursive definitions were necessary to %\textit{%#<i>#use#</i>#%}% values of recursive inductive types effectively, here we find that we need %\index{co-recursive definitions}\textit{%#<i>#co-recursive definitions#</i>#%}% to %\textit{%#<i>#build#</i>#%}% values of co-inductive types effectively.

We can define a stream consisting only of zeroes.%\index{Vernacular commands!CoFixpoint}% *)

CoFixpoint zeroes : stream nat := Cons 0 zeroes.

(* EX: Define a stream that alternates between [true] and [false]. *)
(* begin thide *)

(** We can also define a stream that alternates between [true] and [false]. *)

CoFixpoint trues_falses : stream bool := Cons true falses_trues
with falses_trues : stream bool := Cons false trues_falses.
(* end thide *)

(** Co-inductive values are fair game as arguments to recursive functions, and we can use that fact to write a function to take a finite approximation of a stream. *)

(* EX: Define a function to calculate a finite approximation of a stream, to a particular length. *)
(* begin thide *)

Fixpoint approx A (s : stream A) (n : nat) : list A :=
match n with
| O => nil
| S n' =>
match s with
| Cons h t => h :: approx t n'
end
end.

Eval simpl in approx zeroes 10.
(** %\vspace{-.15in}% [[
= 0 :: 0 :: 0 :: 0 :: 0 :: 0 :: 0 :: 0 :: 0 :: 0 :: nil
: list nat
]]
*)

Eval simpl in approx trues_falses 10.
(** %\vspace{-.15in}% [[
= true
:: false
:: true
:: false
:: true :: false :: true :: false :: true :: false :: nil
: list bool
]]
*)

(* end thide *)

(** So far, it looks like co-inductive types might be a magic bullet, allowing us to import all of the Haskeller's usual tricks.  However, there are important restrictions that are dual to the restrictions on the use of inductive types.  Fixpoints %\textit{%#<i>#consume#</i>#%}% values of inductive types, with restrictions on which %\textit{%#<i>#arguments#</i>#%}% may be passed in recursive calls.  Dually, co-fixpoints %\textit{%#<i>#produce#</i>#%}% values of co-inductive types, with restrictions on what may be done with the %\textit{%#<i>#results#</i>#%}% of co-recursive calls.

The restriction for co-inductive types shows up as the %\index{guardedness condition}\textit{%#<i>#guardedness condition#</i>#%}%, and it can be broken into two parts.  First, consider this stream definition, which would be legal in Haskell.
[[
CoFixpoint looper : stream nat := looper.
]]

<<
Error:
Recursive definition of looper is ill-formed.
In environment
looper : stream nat

unguarded recursive call in "looper"
>>

The rule we have run afoul of here is that %\textit{%#<i>#every co-recursive call must be guarded by a constructor#</i>#%}%; that is, every co-recursive call must be a direct argument to a constructor of the co-inductive type we are generating.  It is a good thing that this rule is enforced.  If the definition of [looper] were accepted, our [approx] function would run forever when passed [looper], and we would have fallen into inconsistency.

Some familiar functions are easy to write in co-recursive fashion. *)

Section map.
Variables A B : Set.
Variable f : A -> B.

CoFixpoint map (s : stream A) : stream B :=
match s with
| Cons h t => Cons (f h) (map t)
end.
End map.

(** This code is a literal copy of that for the list [map] function, with the [Nil] case removed and [Fixpoint] changed to [CoFixpoint].  Many other standard functions on lazy data structures can be implemented just as easily.  Some, like [filter], cannot be implemented.  Since the predicate passed to [filter] may reject every element of the stream, we cannot satisfy the guardedness condition.

The implications of the condition can be subtle.  To illustrate how, we start off with another co-recursive function definition that %\textit{%#<i>#is#</i>#%}% legal.  The function [interleave] takes two streams and produces a new stream that alternates between their elements. *)

Section interleave.
Variable A : Set.

CoFixpoint interleave (s1 s2 : stream A) : stream A :=
match s1, s2 with
| Cons h1 t1, Cons h2 t2 => Cons h1 (Cons h2 (interleave t1 t2))
end.
End interleave.

(** Now say we want to write a weird stuttering version of [map] that repeats elements in a particular way, based on interleaving. *)

Section map'.
Variables A B : Set.
Variable f : A -> B.
(* begin thide *)
(** [[
CoFixpoint map' (s : stream A) : stream B :=
match s with
| Cons h t => interleave (Cons (f h) (map' t)) (Cons (f h) (map' t))
end.
]]

We get another error message about an unguarded recursive call. *)

End map'.

(** What is going wrong here?  Imagine that, instead of [interleave], we had called some other, less well-behaved function on streams.  Here is one simpler example demonstrating the essential pitfall.  We start defining a standard function for taking the tail of a stream.  Since streams are infinite, this operation is total. *)

Definition tl A (s : stream A) : stream A :=
match s with
| Cons _ s' => s'
end.

(** Coq rejects the following definition that uses [tl].
[[
]]

Imagine that Coq had accepted our definition, and consider how we might evaluate [approx bad 1].  We would be trying to calculate the first element in the stream [bad].  However, it is not hard to see that the definition of [bad] %%#"#begs the question#"#%''%: unfolding the definition of [tl], we see that we essentially say %%#"#define [bad] to equal itself#"#%''%!  Of course such an equation admits no single well-defined solution, which does not fit well with the determinism of Gallina reduction.

Since Coq can be considered to check definitions after inlining and simplification of previously defined identifiers, the basic guardedness condition rules out our definition of [bad].  Such an inlining reduces [bad] to:
[[
]]
This is the same looping definition we rejected earlier.  A similar inlining process reveals the way that Coq saw our failed definition of [map']:
[[
CoFixpoint map' (s : stream A) : stream B :=
match s with
| Cons h t => Cons (f h) (Cons (f h) (interleave (map' t) (map' t)))
end.
]]
Clearly in this case the [map'] calls are not immediate arguments to constructors, so we violate the guardedness condition. *)
(* end thide *)

(** A more interesting question is why that condition is the right one.  We can make an intuitive argument that the original [map'] definition is perfectly reasonable and denotes a well-understood transformation on streams, such that every output would behave properly with [approx].  The guardedness condition is an example of a syntactic check for %\index{productivity}\emph{%#<i>#productivity#</i>#%}% of co-recursive definitions.  A productive definition can be thought of as one whose outputs can be forced in finite time to any finite approximation level, as with [approx].  If we replaced the guardedness condition with more involved checks, we might be able to detect and allow a broader range of productive definitions.  However, mistakes in these checks could cause inconsistency, and programmers would need to understand the new, more complex checks.  Coq's design strikes a balance between consistency and simplicity with its choice of guard condition, though we can imagine other worthwhile balances being struck, too. *)

(** * Infinite Proofs *)

(** Let us say we want to give two different definitions of a stream of all ones, and then we want to prove that they are equivalent. *)

CoFixpoint ones : stream nat := Cons 1 ones.
Definition ones' := map S zeroes.

(** The obvious statement of the equality is this: *)

Theorem ones_eq : ones = ones'.

(** However, faced with the initial subgoal, it is not at all clear how this theorem can be proved.  In fact, it is unprovable.  The [eq] predicate that we use is fundamentally limited to equalities that can be demonstrated by finite, syntactic arguments.  To prove this equivalence, we will need to introduce a new relation. *)
(* begin thide *)

Abort.

(** Co-inductive datatypes make sense by analogy from Haskell.  What we need now is a %\textit{%#<i>#co-inductive proposition#</i>#%}%.  That is, we want to define a proposition whose proofs may be infinite, subject to the guardedness condition.  The idea of infinite proofs does not show up in usual mathematics, but it can be very useful (unsurprisingly) for reasoning about infinite data structures.  Besides examples from Haskell, infinite data and proofs will also turn out to be useful for modelling inherently infinite mathematical objects, like program executions.

We are ready for our first %\index{co-inductive predicates}%co-inductive predicate. *)

Section stream_eq.
Variable A : Set.

CoInductive stream_eq : stream A -> stream A -> Prop :=
| Stream_eq : forall h t1 t2,
stream_eq t1 t2
-> stream_eq (Cons h t1) (Cons h t2).
End stream_eq.

(** We say that two streams are equal if and only if they have the same heads and their tails are equal.  We use the normal finite-syntactic equality for the heads, and we refer to our new equality recursively for the tails.

We can try restating the theorem with [stream_eq]. *)

Theorem ones_eq : stream_eq ones ones'.
(** Coq does not support tactical co-inductive proofs as well as it supports tactical inductive proofs.  The usual starting point is the [cofix] tactic, which asks to structure this proof as a co-fixpoint. *)

cofix.
(** [[
ones_eq : stream_eq ones ones'
============================
stream_eq ones ones'

]]

It looks like this proof might be easier than we expected! *)

assumption.
(** [[
Proof completed.
]]

Unfortunately, we are due for some disappointment in our victory lap.
[[
Qed.
]]

<<
Error:
Recursive definition of ones_eq is ill-formed.

In environment
ones_eq : stream_eq ones ones'

unguarded recursive call in "ones_eq"
>>

Via the Curry-Howard correspondence, the same guardedness condition applies to our co-inductive proofs as to our co-inductive data structures.  We should be grateful that this proof is rejected, because, if it were not, the same proof structure could be used to prove any co-inductive theorem vacuously, by direct appeal to itself!

Thinking about how Coq would generate a proof term from the proof script above, we see that the problem is that we are violating the guardedness condition.  During our proofs, Coq can help us check whether we have yet gone wrong in this way.  We can run the command [Guarded] in any context to see if it is possible to finish the proof in a way that will yield a properly guarded proof term.%\index{Vernacular commands!Guarded}%
[[
Guarded.
]]

Running [Guarded] here gives us the same error message that we got when we tried to run [Qed].  In larger proofs, [Guarded] can be helpful in detecting problems %\textit{%#<i>#before#</i>#%}% we think we are ready to run [Qed].

We need to start the co-induction by applying [stream_eq]'s constructor.  To do that, we need to know that both arguments to the predicate are [Cons]es.  Informally, this is trivial, but [simpl] is not able to help us. *)

Undo.
simpl.
(** [[
ones_eq : stream_eq ones ones'
============================
stream_eq ones ones'

]]

It turns out that we are best served by proving an auxiliary lemma. *)

Abort.

(** First, we need to define a function that seems pointless on first glance. *)

Definition frob A (s : stream A) : stream A :=
match s with
| Cons h t => Cons h t
end.

(** Next, we need to prove a theorem that seems equally pointless. *)

Theorem frob_eq : forall A (s : stream A), s = frob s.
destruct s; reflexivity.
Qed.

(** But, miraculously, this theorem turns out to be just what we needed. *)

Theorem ones_eq : stream_eq ones ones'.
cofix.

(** We can use the theorem to rewrite the two streams. *)

rewrite (frob_eq ones).
rewrite (frob_eq ones').
(** [[
ones_eq : stream_eq ones ones'
============================
stream_eq (frob ones) (frob ones')

]]

Now [simpl] is able to reduce the streams. *)

simpl.
(** [[
ones_eq : stream_eq ones ones'
============================
stream_eq (Cons 1 ones)
(Cons 1
((cofix map (s : stream nat) : stream nat :=
match s with
| Cons h t => Cons (S h) (map t)
end) zeroes))

]]

Note that [cofix] notation for anonymous co-recursion, which is analogous to the [fix] notation we have already seen for recursion.  Since we have exposed the [Cons] structure of each stream, we can apply the constructor of [stream_eq]. *)

constructor.
(** [[
ones_eq : stream_eq ones ones'
============================
stream_eq ones
((cofix map (s : stream nat) : stream nat :=
match s with
| Cons h t => Cons (S h) (map t)
end) zeroes)

]]

Now, modulo unfolding of the definition of [map], we have matched our assumption. *)

assumption.
Qed.

(** Why did this silly-looking trick help?  The answer has to do with the constraints placed on Coq's evaluation rules by the need for termination.  The [cofix]-related restriction that foiled our first attempt at using [simpl] is dual to a restriction for [fix].  In particular, an application of an anonymous [fix] only reduces when the top-level structure of the recursive argument is known.  Otherwise, we would be unfolding the recursive definition ad infinitum.

Fixpoints only reduce when enough is known about the %\textit{%#<i>#definitions#</i>#%}% of their arguments.  Dually, co-fixpoints only reduce when enough is known about %\textit{%#<i>#how their results will be used#</i>#%}%.  In particular, a [cofix] is only expanded when it is the discriminee of a [match].  Rewriting with our superficially silly lemma wrapped new [match]es around the two [cofix]es, triggering reduction.

If [cofix]es reduced haphazardly, it would be easy to run into infinite loops in evaluation, since we are, after all, building infinite objects.

One common source of difficulty with co-inductive proofs is bad interaction with standard Coq automation machinery.  If we try to prove [ones_eq'] with automation, like we have in previous inductive proofs, we get an invalid proof. *)

Theorem ones_eq' : stream_eq ones ones'.
cofix; crush.
(** [[
Guarded.
]]
*)
Abort.

(** The standard [auto] machinery sees that our goal matches an assumption and so applies that assumption, even though this violates guardedness.  One usually starts a proof like this by [destruct]ing some parameter and running a custom tactic to figure out the first proof rule to apply for each case.  Alternatively, there are tricks that can be played with %%#"#hiding#"#%''% the co-inductive hypothesis.

%\medskip%

Must we always be cautious with automation in proofs by co-induction?  Induction seems to have dual versions the same pitfalls inherent in it, and yet we avoid those pitfalls by encapsulating safe Curry-Howard recursion schemes inside named induction principles.  It turns out that we can usually do the same with %\index{co-induction principles}\emph{%#<i>#co-induction principles#</i>#%}%.  Let us take that tack here, so that we can arrive at an [induction x; crush]-style proof for [ones_eq'].

An induction principle is parameterized over a predicate characterizing what we mean to prove, %\emph{%#<i>#as a function of the inductive fact that we already know#</i>#%}%.  Dually, a co-induction principle ought to be parameterized over a predicate characterizing what we mean to prove, %\emph{%#<i>#as a function of the arguments to the co-inductive predicate that we are trying to prove#</i>#%}%.

To state a useful principle for [stream_eq], it will be useful first to define the stream head function. *)

Definition hd A (s : stream A) : A :=
match s with
| Cons x _ => x
end.

(** Now we enter a section for the co-induction principle, based on %\index{Park's principle}%Park's principle as introduced in a tutorial by Gim%\'%enez%~\cite{IT}%. *)

Section stream_eq_coind.
Variable A : Set.
Variable R : stream A -> stream A -> Prop.
(** This relation generalizes the theorem we want to prove, characterizinge exactly which two arguments to [stream_eq] we want to consider. *)

Hypothesis Cons_case_hd : forall s1 s2, R s1 s2 -> hd s1 = hd s2.
Hypothesis Cons_case_tl : forall s1 s2, R s1 s2 -> R (tl s1) (tl s2).
(** Two hypotheses characterize what makes a good choice of [R]: it enforces equality of stream heads, and it is %%#<i>#hereditary#</i>#%''% in the sense that a [R] stream pair passes on %%#"#[R]-ness#"#%''% to its tails.  An established technical term for such a relation is %\index{bisimulation}\emph{%#<i>#bisimulation#</i>#%}%. *)

(** Now it is straightforward to prove the principle, which says that any stream pair in [R] is equal.  The reader may wish to step through the proof script to see what is going on. *)
Theorem stream_eq_coind : forall s1 s2, R s1 s2 -> stream_eq s1 s2.
cofix; destruct s1; destruct s2; intro.
generalize (Cons_case_hd H); intro Heq; simpl in Heq; rewrite Heq.
constructor.
apply stream_eq_coind.
apply (Cons_case_tl H).
Qed.
End stream_eq_coind.

(** To see why this proof is guarded, we can print it and verify that the one co-recursive call is an immediate argument to a constructor. *)
Print stream_eq_coind.

(** We omit the output and proceed to proving [ones_eq''] again.  The only bit of ingenuity is in choosing [R], and in this case the most restrictive predicate works. *)

Theorem ones_eq'' : stream_eq ones ones'.
apply (stream_eq_coind (fun s1 s2 => s1 = ones /\ s2 = ones')); crush.
Qed.

(** Note that this proof achieves the proper reduction behavior via [hd] and [tl], rather than [frob] as in the last proof.  All three functions pattern match on their arguments, catalyzing computation steps.

Compared to the inductive proofs that we are used to, it still seems unsatisfactory that we had to write out a choice of [R] in the last proof.  An alternate is to capture a common pattern of co-recursion in a more specialized co-induction principle.  For the current example, that pattern is: prove [stream_eq s1 s2] where [s1] and [s2] are defined as their own tails. *)

Section stream_eq_loop.
Variable A : Set.
Variables s1 s2 : stream A.

Hypothesis Cons_case_hd : hd s1 = hd s2.
Hypothesis loop1 : tl s1 = s1.
Hypothesis loop2 : tl s2 = s2.

(** The proof of the principle includes a choice of [R], so that we no longer need to make such choices thereafter. *)

Theorem stream_eq_loop : stream_eq s1 s2.
apply (stream_eq_coind (fun s1' s2' => s1' = s1 /\ s2' = s2)); crush.
Qed.
End stream_eq_loop.

Theorem ones_eq''' : stream_eq ones ones'.
apply stream_eq_loop; crush.
Qed.
(* end thide *)

(** Let us put [stream_eq_ind] through its paces a bit more, considering two different ways to compute infinite streams of all factorial values.  First, we import the [fact] factorial function from the standard library. *)

Require Import Arith.
Print fact.
(** %\vspace{-.15in}%[[
fact =
fix fact (n : nat) : nat :=
match n with
| 0 => 1
| S n0 => S n0 * fact n0
end
: nat -> nat
]]
*)

(** The simplest way to compute the factorial stream involves calling [fact] afresh at each position. *)

CoFixpoint fact_slow' (n : nat) := Cons (fact n) (fact_slow' (S n)).
Definition fact_slow := fact_slow' 1.

(** A more clever, optimized method maintains an accumulator of the previous factorial, so that each new entry can be computed with a single multiplication. *)

CoFixpoint fact_iter' (cur acc : nat) := Cons acc (fact_iter' (S cur) (acc * cur)).
Definition fact_iter := fact_iter' 2 1.

(** We can verify that the streams are equal up to particular finite bounds. *)

Eval simpl in approx fact_iter 5.
(** %\vspace{-.15in}%[[
= 1 :: 2 :: 6 :: 24 :: 120 :: nil
: list nat
]]
*)
Eval simpl in approx fact_slow 5.
(** %\vspace{-.15in}%[[
= 1 :: 2 :: 6 :: 24 :: 120 :: nil
: list nat
]]

Now, to prove that the two versions are equivalent, it is helpful to prove (and add as a proof hint) a quick lemma about the computational behavior of [fact]. *)

(* begin thide *)
Lemma fact_def : forall x n,
fact_iter' x (fact n * S n) = fact_iter' x (fact (S n)).
simpl; intros; f_equal; ring.
Qed.

Hint Resolve fact_def.

(** With the hint added, it is easy to prove an auxiliary lemma relating [fact_iter'] and [fact_slow'].  The key bit of ingenuity is introduction of an existential quantifier for the shared parameter [n]. *)

Lemma fact_eq' : forall n, stream_eq (fact_iter' (S n) (fact n)) (fact_slow' n).
intro; apply (stream_eq_coind (fun s1 s2 => exists n, s1 = fact_iter' (S n) (fact n)
/\ s2 = fact_slow' n)); crush; eauto.
Qed.

(** The final theorem is a direct corollary of [fact_eq']. *)

Theorem fact_eq : stream_eq fact_iter fact_slow.
apply fact_eq'.
Qed.

(** As in the case of [ones_eq'], we may be unsatisfied that we needed to write down a choice of [R] that seems to duplicate information already present in a lemma statement.  We can facilitate a simpler proof by defining a co-induction principle specialized to goals that begin with single universal quantifiers, and the strategy can be extended in a straightforward way to principles for other counts of quantifiers.  (Our [stream_eq_loop] principle is effectively the instantiation of this technique to zero quantifiers.) *)

Section stream_eq_onequant.
Variables A B : Set.
(** We have the types [A], the domain of the one quantifier; and [B], the type of data found in the streams. *)

Variables f g : A -> stream B.
(** The two streams we compare must be of the forms [f x] and [g x], for some shared [x].  Note that this falls out naturally when [x] is a shared universally quantified variable in a lemma statement. *)

Hypothesis Cons_case_hd : forall x, hd (f x) = hd (g x).
Hypothesis Cons_case_tl : forall x, exists y, tl (f x) = f y /\ tl (g x) = g y.
(** These conditions are inspired by the bisimulation requirements, with a more general version of the [R] choice we made for [fact_eq'] inlined into the hypotheses of [stream_eq_coind]. *)

Theorem stream_eq_onequant : forall x, stream_eq (f x) (g x).
intro; apply (stream_eq_coind (fun s1 s2 => exists x, s1 = f x /\ s2 = g x)); crush; eauto.
Qed.
End stream_eq_onequant.

Lemma fact_eq'' : forall n, stream_eq (fact_iter' (S n) (fact n)) (fact_slow' n).
apply stream_eq_onequant; crush; eauto.
Qed.

(** We have arrived at one of our customary automated proofs, thanks to the new principle. *)
(* end thide *)

(** * Simple Modeling of Non-Terminating Programs *)

(** We close the chapter with a quick motivating example for more complex uses of co-inductive types.  We will define a co-inductive semantics for a simple imperative programming language and use that semantics to prove the correctness of a trivial optimization that removes spurious additions by 0.  We follow the technique of %\index{co-inductive big-step operational semantics}\emph{%#<i>#co-inductive big-step operational semantics#</i>#%}~\cite{BigStep}%.

We define a suggestive synonym for [nat], as we will consider programs with infinitely many variables, represented as [nat]s. *)

Definition var := nat.

(** We define a type [vars] of maps from variables to values.  To define a function [set] for setting a variable's value in a map, we import the [Arith] module from Coq's standard library, and we use its function [beq_nat] for comparing natural numbers. *)

Definition vars := var -> nat.
Require Import Arith.
Definition set (vs : vars) (v : var) (n : nat) : vars :=
fun v' => if beq_nat v v' then n else vs v'.

(** We define a simple arithmetic expression language with variables, and we give it a semantics via an interpreter. *)

Inductive exp : Set :=
| Const : nat -> exp
| Var : var -> exp
| Plus : exp -> exp -> exp.

Fixpoint evalExp (vs : vars) (e : exp) : nat :=
match e with
| Const n => n
| Var v => vs v
| Plus e1 e2 => evalExp vs e1 + evalExp vs e2
end.

(** Finally, we define a language of commands.  It includes variable assignment, sequencing, and a %\texttt{%#<tt>#while#</tt>#%}% form that repeats as long as its test expression evaluates to a nonzero value. *)

Inductive cmd : Set :=
| Assign : var -> exp -> cmd
| Seq : cmd -> cmd -> cmd
| While : exp -> cmd -> cmd.

(** We could define an inductive relation to characterize the results of command evaluation.  However, such a relation would not capture %\emph{%#<i>#nonterminating#</i>#%}% executions.  With a co-inductive relation, we can capture both cases.  The parameters of the relation are an initial state, a command, and a final state.  A program that does not terminate in a particular initial state is related to %\emph{%#<i>#any#</i>#%}% final state. *)

CoInductive evalCmd : vars -> cmd -> vars -> Prop :=
| EvalAssign : forall vs v e, evalCmd vs (Assign v e) (set vs v (evalExp vs e))
| EvalSeq : forall vs1 vs2 vs3 c1 c2, evalCmd vs1 c1 vs2
-> evalCmd vs2 c2 vs3
-> evalCmd vs1 (Seq c1 c2) vs3
| EvalWhileFalse : forall vs e c, evalExp vs e = 0
-> evalCmd vs (While e c) vs
| EvalWhileTrue : forall vs1 vs2 vs3 e c, evalExp vs1 e <> 0
-> evalCmd vs1 c vs2
-> evalCmd vs2 (While e c) vs3
-> evalCmd vs1 (While e c) vs3.

(** Having learned our lesson in the last section, before proceeding, we build a co-induction principle for [evalCmd]. *)

Section evalCmd_coind.
Variable R : vars -> cmd -> vars -> Prop.

Hypothesis AssignCase : forall vs1 vs2 v e, R vs1 (Assign v e) vs2
-> vs2 = set vs1 v (evalExp vs1 e).

Hypothesis SeqCase : forall vs1 vs3 c1 c2, R vs1 (Seq c1 c2) vs3
-> exists vs2, R vs1 c1 vs2 /\ R vs2 c2 vs3.

Hypothesis WhileCase : forall vs1 vs3 e c, R vs1 (While e c) vs3
-> (evalExp vs1 e = 0 /\ vs3 = vs1)
\/ exists vs2, evalExp vs1 e <> 0 /\ R vs1 c vs2 /\ R vs2 (While e c) vs3.

(** The proof is routine.  We make use of a form of %\index{tactics!destruct}%[destruct] that takes an %\index{intro pattern}\emph{%#<i>#intro pattern#</i>#%}% in an [as] clause.  These patterns control how deeply we break apart the components of an inductive value, and we refer the reader to the Coq manual for more details. *)

Theorem evalCmd_coind : forall vs1 c vs2, R vs1 c vs2 -> evalCmd vs1 c vs2.
cofix; intros; destruct c.
rewrite (AssignCase H); constructor.
destruct (SeqCase H) as [? [? ?]]; econstructor; eauto.
destruct (WhileCase H) as [[? ?] | [? [? [? ?]]]]; subst;
[ econstructor | econstructor 4 ]; eauto.
Qed.
End evalCmd_coind.

(** Now that we have a co-induction principle, we should use it to prove something!  Our example is a trivial program optimizer that finds places to replace [0 + e] with [e]. *)

Fixpoint optExp (e : exp) : exp :=
match e with
| Plus (Const 0) e => optExp e
| Plus e1 e2 => Plus (optExp e1) (optExp e2)
| _ => e
end.

Fixpoint optCmd (c : cmd) : cmd :=
match c with
| Assign v e => Assign v (optExp e)
| Seq c1 c2 => Seq (optCmd c1) (optCmd c2)
| While e c => While (optExp e) (optCmd c)
end.

(** Before proving correctness of [optCmd], we prove a lemma about [optExp].  This is where we have to do the most work, choosing pattern match opportunities automatically. *)

(* begin thide *)
Lemma optExp_correct : forall vs e, evalExp vs (optExp e) = evalExp vs e.
induction e; crush;
repeat (match goal with
| [ |- context[match ?E with Const _ => _ | Var _ => _
| Plus _ _ => _ end] ] => destruct E
| [ |- context[match ?E with O => _ | S _ => _ end] ] => destruct E
end; crush).
Qed.

Hint Rewrite optExp_correct : cpdt.

(** The final theorem is easy to establish, using our co-induction principle and a bit of Ltac smarts that we leave unexplained for now.  Curious readers can consult the Coq manual, or wait for the later chapters of this book about proof automation. *)

Theorem optCmd_correct : forall vs1 c vs2, evalCmd vs1 c vs2
-> evalCmd vs1 (optCmd c) vs2.
intros; apply (evalCmd_coind (fun vs1 c' vs2 => exists c, evalCmd vs1 c vs2
/\ c' = optCmd c)); eauto; crush;
match goal with
| [ H : _ = optCmd ?E |- _ ] => destruct E; simpl in *; discriminate
|| injection H; intros; subst
end; match goal with
| [ H : evalCmd _ _ _ |- _ ] => ((inversion H; [])
|| (inversion H; [|])); subst
end; crush; eauto 10.
Qed.
(* end thide *)

(** In this form, the theorem tells us that the optimizer preserves observable behavior of both terminating and nonterminating programs, but we did not have to do more work than for the case of terminating programs alone.  We merely took the natural inductive definition for terminating executions, made it co-inductive, and applied the appropriate co-induction principle.  Curious readers might experiment with adding command constructs like %\texttt{%#<tt>#if#</tt>#%}%; the same proof should continue working, after the co-induction principle is extended to the new evaluation rules. *)

(** * Exercises *)

(** %\begin{enumerate}%#<ol>#

%\item%#<li># %\begin{enumerate}%#<ol>#
%\item%#<li># Define a co-inductive type of infinite trees carrying data of a fixed parameter type.  Each node should contain a data value and two child trees.#</li>#
%\item%#<li># Define a function [everywhere] for building a tree with the same data value at every node.#</li>#
%\item%#<li># Define a function [map] for building an output tree out of two input trees by traversing them in parallel and applying a two-argument function to their corresponding data values.#</li>#
%\item%#<li># Define a tree [falses] where every node has the value [false].#</li>#
%\item%#<li># Define a tree [true_false] where the root node has value [true], its children have value [false], all nodes at the next have the value [true], and so on, alternating boolean values from level to level.#</li>#
%\item%#<li># Prove that [true_false] is equal to the result of mapping the boolean %%#"#or#"#%''% function [orb] over [true_false] and [falses].  You can make [orb] available with [Require Import Bool.].  You may find the lemma [orb_false_r] from the same module helpful.  Your proof here should not be about the standard equality [=], but rather about some new equality relation that you define.#</li>#
#</ol>#%\end{enumerate}% #</li>#

#</ol>#%\end{enumerate}% *)